Centre for Continuing Education

News of 2015

  2017 (11)       2016 (26)       2015 (16)       2014 (4)

Industrial Meet conducted by Centre for Continuing Education (CCE) on December 1,2015. More than 10 top Industry professionals attended the meet.

 

  • December 01, 2015

The workshop was planned on Workshop on 3D CAD Solid Modeling using Software.This workshop is intended to provide participants with a detailed introduction of Introduction to Solid works Software,2D Modeling using software,3D Modeling using software,Assembly of 3D models.This workshop will create the Professional skills for designing using software. As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students.

This workshop had created the skill of Workshop on 3D CAD Solid Modeling using Software and other different topics, which can be helpful to them to in their student career as well as to grab job opportunity.The Workshop was Successfully completed With the 101 No of Students.

For Contents Please Refer this Link.

  • October 19, 2015

Energy Efficiency of Process Utilities - The workshop was planned for Students (UG / PG/ Ph D),Faculty members,People from industries.As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students.the workshope was completed succesfully with 34 number of students.

This workshop had created the skill of Energy Efficiency. which can be helpful to them to in their career.

For Contents Please Refer this Link

  • October 10, 2015

Testing and Verification of VLSI Design - This workshop was intended to provide participants with a detailed introduction of Testing and Verification of VLSI Design for Interested faculty members from Engineering colleges, polytechnics, engineers or professionals from R & D organizations, research scholars and PG students.This workshop will create the skill of Increase the effectiveness of their .Verification Plan and Flow,Verification Methods,Verification Tools,Recent Trends in Verification,Introduction to Testing,Defect and Fault Modelling,Automatic Test Pattern Generato,Design For Test,Built-In-Self-Test,Test Data Compression this all the contents was discussed in seminar.this workshop will create the best skill for teachers..More Details

This Workshop was succesfully completed with 39 number of students.

  • October 10, 2015

The workshop was planned on Effective Communications for Higher Performance .This workshop is intended to provide participants with a detailed introduction of Exploration of Self OrientationThe Process of International Communication,Listening Skills,Feedback Skills,Non-Verbal Communication,Written Communication,Electronic Communications including Web,resentation Skills. As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students.

This workshop had created the skill of Communications which can be helpful to them to in their career as well as to grab job opportunity.The Workshop was Successfully completed With the 11 No of Students.

For Contents Please Refer this Link.

  • October 08, 2015

The workshop was planned on MDP on Managerial Skill for Supervisory Personnel.This workshop was planned for Industry Person.As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students.

This workshop had created the skill of Management. which can be helpful to them to in their career.

For Contents Please Refer this Link

  • October 05, 2015

The Seminar was planned on CTC-Technical & Regulatory Requirement. As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students. In the workshop we covered different topics like Introduction of basic controls,Common Technical Document (CTD) Overview,CTD Requirements in US, EU, India and ASEAN,Consequences faced during CTD filing,Comparison of CTD with ACTD,eCTD requirements and software used in eCTD

This workshop Can be helpful to them to in their student career as well as to grab job opportunity.this workshop was succesfully vcompleted with the 34 number of students

For Contents Please Refer this Link.

  • September 26, 2015

The workshop was planned on Readography.This workshop was planned for Interested faculty members from Engineering colleges, polytechnics, and other academic Institutes, PG/ Degree / Diploma / MCA / BCA students.As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students.

This workshop had created the skill of , which can be helpful to them to in their student career as well as to grab job opportunity.

For Contents Please Refer this Link

  • September 19, 2015

The workshop was planned on Engineering Graphics.This workshop will create the Professional skills for Introduction to Engineering Graphics.As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students. In the workshop we covered different topics like Fundamentals of Engineering Graphics: Drawing Instruments, Types of Lines, Dimensioning & it’s Rules, Letters,Engineering Curves: Conics, Involute, Cycloid, Helix,Spiral,Orthographic Projection: Type of Projection, First Angle & Third Angle Projection Method, Few Practice Problems,Isometric Projection: Basic Concept, Isometric Lines, ,Isometric Planes, Isometric Scale, etc,Introduction to Google Sketch Up (Freeware),subject from various Universities.

This workshop had created the skill of Ebgineering Graphics, which can be helpful to them to in their student career as well as to grab job opportunity.The Workshop was Successfully completed With the 13 No of Students.

For Contents Please Refer this Link

  • July 06, 2015

The workshop was planned on Advance Control Using PLC. This workshop will create the Professional skills for Introduction to Advanced PLC,Programming of PLC using various programming software,Programing of HMI,Advanced Control using PLC.As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students. In the workshop we covered different topics like Concept of Basics of PLC, Introduction to IEC standard for PLC, Hardware Configuration of advanced PLC,Basics of automation software, Relay based instructions, data transfer instructions, arithmetic instructions, logical Instructions,Introduction of GT series HMI, Introduction of GT design, Programing interfacing,PID in PLC, Level Control using PLC, Pressure Control Using PLC, Algorithm implementation using Structured Text (ST), Low cost SCADA design using LabVIEW over MODBUS communication. .

This workshop had created the skill of Advance Contrl Using PLC, which can be helpful to them to in their student career as well as to grab job opportunity.The Workshop was Successfully completed With the 40 No of Students.

For Contents Please Refer this

  • April 11, 2015

The workshop was planned on A Electronic System Design.This workshop is intended to provide participants with a detailed introduction of Basics of linear and switched mode power supply,Comparative analysis of switched mode powersupplies (SMPS),Design of high frequency inductors as per the topology selected,Design of high frequency transformers,Design and validation of filters,Design of SMPS and choppers including selection of switching devices,Design and selection of driver circuits for solid state switches,Hardware lab sessions on design, fabrication and testing of SMPS converter.. As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students. In the workshop we covered different topics like Basic of Electronics System Design .

This workshop had created the skill of Electronic System and other different Designing, which can be helpful to them to in their student career as well as to grab job opportunity.The Workshop was Successfully completed With the 11 No of Students.

For Contents Please Refer this Link.

  • March 01, 2015

The workshop was planned on Sustainable Building and Town Planning.This workshop is intended to provide participants with a detailed introduction of Sustainable Planning. This workshop will create the Professional skills for Building Planning,Sustainable Planning ,town Planning . As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students. In the workshop we covered different topics like Concept of City Development Plan ,Micro Level Planning,General Development Control Regulation , Applications of RS and GIS in development of town and Infrastructure Planning,Concept of Green building material , Sustainable Planning , Exposure to Planning and designing Software .

This workshop had created the skill of Sustainable Building and Town Planning, which can be helpful to them to in their student career as well as to grab job opportunity.The Workshop was Successfully completed With the 40 No of Students.

For Contents Please Refer this Link.

  • February 28, 2015

This workshop Was intended to provide participants The human chromosome analysis is a key tool for research and progress in clinical management of human genetic diseases including cancer, mainly leukaemia. With the advent of molecular cytogenetics and DNA based techniques, the conventional method of chromosome analysis Was thought to be on way to extinction,. As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students.

This workshop had created the skill of Hardware and Software Co-Design,which can be helpful to them to in their student career as well as to grab job opportunity.The Workshop was Successfully completed With the 11 No of Students.

For Contents Please Refer this Link.

  • February 23, 2015

The workshop was planned on Wordpress- An Open Source tool.This workshop is intended to provide participants with a detailed introduction of Wordpress and other different CMS, Database Handling and Theme integration, Basic Plugging Handling, This workshop will create the Professional skills for website designing using Wordpress- An Open Source tool. As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students. In the workshop we covered different topics like Basic of Wordpress- An Open Source tool,Database Handling,Theme Integration,Basic Plugging Handling ,Make live changes and operate site .

This workshop had created the skill of Wordpress and other different CMS, which can be helpful to them to in their student career as well as to grab job opportunity.The Workshop was Successfully completed With the 11 No of Students.

For Contents Please Refer this Link.

  • February 19, 2015

The workshop was planned with different sessions on Web designing using Android Applications. As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students. In the workshop we covered different topics like Basic of Android,Layout Handling in XML,Image and Media Handling, Email Handling,Camera and Wall Paper Application.

This workshop had created the skill of website designing in students using Android Application, which can be helpful to them to in their student career as well as to grab job opportunity.We have Successfully Completed Programme With 11 No of Students

For Contents Please Refer this Link.

  • February 19, 2015

The workshop was planned with different sessions on Hardware and Software Co-Design. As per the planning workshop remain successful to provide detail knowledge to the participants due to good interaction between experts and students. In the workshop we covered different topics like Applications and research opportunities in hardware software co-simulation and embedded systems,Introduction to promising hardware, controllers and boards,Introducing FPGA tools and techniques ,Demo and discussion of FPGA project ,Programming with RasberryPi ,Project Demo ,Kinect – Applications and programming ,Programming with BegalBone ,A ignition spark towards Python programming,Programming Sensor Motes.

This workshop had created the skill of Hardware and Software Co-Design,which can be helpful to them to in their student career as well as to grab job opportunity.Workshop was Successfully completed With the 25 No of Students.

For Contents Please Refer this Link.

  • February 19, 2015